Back PTR2000 - PLASMA TRIMMING ROD™
Patent Pending
 
PTR2000 Front Page

The PTR-2000 Plasma Trimming Rod™ is an accessory for any plasma cleaning system to remove damaged surface regions from FIB and ion milled TEM samples using low energy ions. It utilizes the plasma as the source of ions and external biasing for extracting the ions from the discharge. The geometry of the holder and sample creates the proper electric fields that cause the ions to deflect towards the sample at relatively low angles. With the appropriate adapter, the PTR-2000 can be used with any plasma cleaner. The PTR-2000 is programmable with up to four steps with voltage values between 0 and 500 V and 0-24 hours each.
[Read brochure..]

Model PTR-2000 - Plasma Trimming™ Rod
Included Parts
Part Number Request Quote
  PTR2000  
    Quantity
PTR-2000 Rod Assembly 02-07270 1
PTR-2000 Programmable Power Supply, 0-500 V, 5 mA 02-07230 1
BNC Coaxial Cable 0550-023 1
Modified Fortress™ Holders 02-07265 5
Platform Ring 01-07073-02 1
Hex Wrench 0541-003 1
SS100 SampleSaver™ Storage Container SS100 1
SS100-FIB Rack SS100-FIB 1
Graphite Paint (Isopropanol base, 30 g) 0909-001 1
Paintbrush, Red Sable, Size #0 0909-002 1
Please specify:     (Please add a note in the "special instructions" box during checkout)    
PTR-2000 Rod Adapter Shield for SBT PC-2000 plasma cleaner 01-07259-01 1
PTR-2000 Rod Adapter Shield for EA Fischione plasma cleaner    
PTR-2000 Rod Adapter Shield for Gatan plasma cleaner    
Input quantity and click Submit Qty.
Spare Parts and Accessories Listed Below are the various spare parts and accessories that are available for use with PTR2000.
Input quantity and click submit at the bottom
Click Images Part Number Description Price Enter
Qty.
PCPT-005 Specimen Stage Adapter PCPT-005 Modified Fortress™ holder (1 pkg. of 5) This will fill out the SS100-FIB rack and is only available with original purchase of PTR-2000 Plasma Trimming™ Rod. Qty.
FIB-006LP Fortress Sample Loader FIB-006LP Fortress™ Sample Loader
Securely holds the Fortress™ Low Profile holder under a stereomicroscope and permits viewing from 2 angles without changing focus on the microscope
Qty.
02-07265-01 Modified Low Profile Holder FIB-001MLP Modified Fortress™ FIB Holder (each) to hold either a standard FIB lift out specimen on a grid or an H-Bar diced-cut sample in FIB and in the Plasma Trimmer™.

**Quantity Discounts are available on the modified Fortress™ FIB Holders:
1-9 10-24 25-49 50+ - Call to order
Qty.
SS100 Sample Saver Portable Storage SS100 SampleSaver™ Portable Storage Container
Includes one storage container and valve. Outside Dimensions (fully closed): 2.75” OD x 5” high
Qty.
SS100-FIB Sample Rack SS100-FIB FIB Sample Rack to store SBT Fortress™ Holders (Fortress™ holders are not included). This rack can hold any samples with a 1/8" diameter pin. That would include SEM Mounts, Fortress™ FIB Holders, Tripod Polisher® SEM stubs, etc. They are securely held in place with a set screw. The SS100-FIB rack consists of 2 tiers and each tier can hold 5 samples. One tier is labeled 1-5 and the other is labeled 6-10. Total sample capacity is 10 samples. Qty.
SS100-125 SEM Stub Holder SS100-125 1/8” SEM Stub Holder 
1/8” pin for a total sample capacity of 15 samples.
Qty.
SS1FIB Sample Saver SS1FIB SS-100 SampleSaver™ with SS100-FIB rack (10 1/8" pin positions, labeled and set screw secured) Qty.
SS1125  Specimen Stage Adapter SS1125 SS100 SampleSaver™ with SS100-125 rack (15 1/8” pin positions, rubber grommets) Qty.
SS1FIB05M  Sample Saver Combo SS1FIB-05M SS-100 SampleSaver™ with SS100-FIB rack (10 1/8" pin positions, labeled and set screw secured) with five FIB-001MLP Modified Fortress™ Holders and one FortressT Sample Loader, FIB-006LP included. (The modified Fortress™ holders are used with the model PCPT Plasma Trimmer™ or the model PTR-2000 Plasma Trimming™ Rod.) Qty.
SS1FIB-10M  Sample Saver Combo

SS1FIB-10M

SS-100 SampleSaver™ with SS100-FIB rack (10 1/8" pin positions, labeled and set screw secured) with ten FIB-00M1LP Modified Fortress™ Holders and one Fortress™ Sample Loader, FIB-006LP included. (The modified Fortress™ holders are used with the model PCPT Plasma Trimmer™ or the model PTR-2000 Plasma Trimming™ Rod.) Qty.
SS200 Sample Saver SS200 Sample Saver™ Portable Storage Container
Includes one storage container and valve. Outside Dimensions (fully closed): 3.375" OD x 7.75" high
Qty.
SS200-FIB-06  Sample Holder SS200-FIB-06 Sample Holder to store SBT Fortress™ Holders(Fortress™ holders are not included). This rack can hold any samples with a 1/8" diameter pin. That would include SEM Mounts, Fortress™ FIB Holders, Tripod Polisher® SEM stubs etc. They are securely held in place with a set screw. The SS200-FIB-06 rack consists of 1 tier and each tier can hold 6 samples. Total sample capacity is 6 samples. This rack unit can be expanded to include 4 additional tiers with the addition of SS200-FIB-T tiers. Qty.
SS200-FIB-30  Sample Holder SS200-FIB-30 Sample Holder to store SBT Fortress™ Holders (Fortress™ holders are not included). This rack can hold any samples with a 1/8" diameter pin. That would include SEM Mounts, Fortress™ FIB Holders, Tripod Polisher® SEM stubs etc. They are securely held in place with a set screw. The SS200-FIB-5 rack consists of 5 tiers and each tier can hold 6 samples. Total sample capacity is 30 samples. Qty.
SS2FIB-06M Combo SS2FIB-06M

Includes one SS-200 SampleSaver™; Storage Container, one SS200-FIB rack that only has one tier, six FIB-001MLP modified Fortress™ Holders and one Fortress™ Sample Loader.  This unit can be expanded to include 4 additional tiers with the addition of SS200-FIB-T, SS200-FIB-TF or SS200-FIB-TM tiers. (The modified Fortress™ holders are used with the model PCPT Plasma Trimmer™ or the model PTR-2000 Plasma Trimming™ Rod.)

Qty.
SS2FIB-30M Combo SS2FIB-30M

Includes one SS-200 SampleSaver™ Storage Container, one SS200-FIB rack, thirty modified FIB-001MLP modified Fortress™ Holders, and one Fortress™ Sample Loader.  (The modified Fortress™ holders are used with the model PCPT Plasma Trimmer™ or the model PTR-2000 Plasma Trimming™ Rod.)

Qty.
SS2FIB-TM SS200-FIB-TM One tier for SS2FIB-06M. Includes one tier, SS200-FIB-T for SS2FIB-06M and six FIB-001MLP modified Fortress™ Holders. (The modified Fortress™ holders are used with the model PCPT Plasma Trimmer™ or the model PTR-2000 Plasma Trimming™ Rod.) Qty.
SS2FIBT One Tier SS200-FIB-T

One tier for SS200-FIB-06, SS2FIB-06F or SS2FIB-06M.  (No holders included.)

Qty.
  0909-001 Graphite Paint (Isopropanol base, 30g)
Qty.
  0909-002 Paintbrush, Red Sable, Size #0
Qty.
*****Hover over Application Number to see Title or Click Here for a Complete Listing
Application Notes: 63  
South Bay Technology is no longer accepting web site orders. On October 4th, 2017 Ted Pella, Inc. purchased the products of South Bay Technology. Ted Pella, Inc. is in the process of evaluating and transitioning the products of SBT, which will happen over a period of the next several months. Please contact sales@tedpella.com for inquiries as to the status of products you wish to order.
Back to Top
South Bay Technology, Inc. ©2012