South Bay Technology, Inc. Model 260 3-Axis Goniometer

MODEL 260 - 3-axis Goniometer

The Model 260 3-Axis Goniometer is used to hold crystals in the process of determining crystallographic orientation using either Laue back reflection or optical orientation techniques. The integral track mount is designed to fit a 2.19" wide or narrower x-ray or optical track. There is ±25° of rotation in two of the axes and a full 360° degrees of rotation in the other. The Model 260 is designed so that a 2" diameter crystal mounted on the goniometer with a 1/2" high mounting block is 3.625 inches above the track. The P/N 01-02531 riser can be used to raise the Model 260 by 1 inch when working with smaller crystals.

Click for Bigger Image	Model/Part # (Link)	Description Input quantity and click submit at the bottom	Price	Enter Qty.
	Model 260	The Model 260 3-Axis Goniometer is used to hold crystals in the process of determining crystallographic orientation using either Laue back reflection or optical orientation techniques. The integral track mount is designed to fit a 2.19" wide or narrower x-ray or optical track.	4,835.00	Qty.
	Model 25005	Track mount (for 4in. height)	1,454.00	Qty.
	Model 250	The Model 250 2-Axis Goniometer (all stainless steel, includes mounting blocks and orientation software) can be used with the Model 75002 Slide Assembly so it can be used on the Model 750 Acid Saw. It can be mounted on either the Model 25002 - 3.625" in. ht. or 25005 - 4.0 in. ht. as shown for orientation.	2,282.00	Qty.
	01-02531-01	1 in. riser for Model 260	279.00	Qty.
	Model 265	The Model 265 is ideal for the orientation and cutting of large crystals and can easily be adapted to existing equipment.	12,040.00	Qty.
	Model 65005	2-axis Goniometer (used on Model 650)	1,495.00	Qty.
	Model 65011	Track mount (for 3.625in. to 4in. height)- used to hold the Model 65005	1,495.00	Qty.
	Model 66005	2-axis Goniometer (used on Model 660)	1,218.00	Qty.
	Model 66011	Track mount (for 3.625in. to 4in. height)- used to hold the Model 65005	1,566.00	Qty.
	Model 170	Multi-axis Lapping Fixture (used to polish samples on fixture)	11,047.00	Qty.
	Model 17011	Track mount (for 3.625in. height used on Model 170)	4,249.00	Qty.
	Model 210	Optical Orientation Instrument (includes laser w/out Goniometer or track mount)	7,195.00	Qty.
	Model 25015	Lapping and Polishing fixtures (used to hold Model 250 for polishing) (was 25010)	5,169.00	Qty.
	Model 85024	Mount for holding Model 260 on Model 850 Wire Saw	3,621.00	Qty.